DOT Pipeline Compliance News
April 2016 Edition
PHMSA Gas Transmission NPRM
[Docket No. PHMSA-2011-0023 RIN 2137-AE72]
Back to Top
The Pipeline Hazardous Materials Safety Administration (PHMSA) intends to publish a Notice of Proposed Rulemaking (NRPM) to revise the Pipeline Safety Regulations applicable to the safety of onshore gas transmission and gathering pipelines. The proposals within this rule cover many different
aspects of the safety of these pipelines, including:
Once the NPRM is officially published in the Federal Register, RCP will send out a special edition newsletter that will be just on this rule. In the interim, contact Jessica Foley for a pre-publication version.
- New definitions, including Moderate Consequence Areas
- New standards incorporated by reference
- Expansion of regulated gas gathering
- Additional corrosion control measures
- Spike testing requirements
- Material verification
- MAOP verification
- Removal of the "Grandfather Clause" (§192.619(c)) for MAOP determination
- Additional integrity assessment and repair criteria
- Data gathering and integration
- Management of change
- Inspection of pipelines following weather events
- Records retention schedule
Louisiana State Regulation Changes Concerning Salt Dome Storage
Updated April 4, 2016
Back to Top
Changes were made to Louisiana state regulations concerning Hydrocarbon Storage Wells in Salt Dome Cavities (18.104.22.168) and Class III (Solution Mining) Injection Wells (22.214.171.124). Salt dome storage development and activity has come under increasing scrutiny at the state and federal levels, and these changes
reflect the additional interest in these operations.
Two of the changes that can potentially mean more work and expense for the owner / operator involve the new permitting regime, which has many more steps than in the past, and a change to a 15 year frequency for refilling caverns with water and running multiple integrity tests. Other changes are summarized
For Title 43, Part XVII.3.3 – Hydrocarbon Storage Wells in Salt Dome Cavities, changes to the regulations include:
Similar changes were made in Title 43, Part XVII.5.33 – Class III (Solution Mining) Injection Wells.
- §303.B. This modification involves Statewide Orders 29-M and 29-M (Revision 3) and requirements for compliance.
- §303.G. Additional Requirements: these are now given in much greater detail, and reports must be submitted by licensed professional geoscientists and licensed professional engineers.
- §309.B.1. The financial responsibility requirements are now expanded to explicitly include class II saltwater disposal wells and any associated equipment or pipelines whether located inside or outside of the permitted facility boundary.
- §309.B.3. and 4. The information on Assistance to Residents has been removed for other parts of the regulation and consolidated and expanded in new subpart 3. The new subpart 4 contains a description of reimbursement to states and individuals.
- §309.F.9. Under Notification Requirements, there is an addition that requires that hydrocarbon storage caverns that are not in an inactive status as of the date written notification of permanent conclusion of storage operations is submitted to the Office of Conservation will be immediately placed in an inactive status.
- §309.K.1. This section, under Compliance Review, now gives a detailed list of acceptable submittals for satisfying cavern location and periphery of salt stock review.
- §311.D.1.c. This is a new section under Public Hearing Requirements as part of the Permitting Process that pertains only to Iberia Parish, and concerns the requirement of a public hearing prior to the issuing of certain salt cavern permits.
- §315.B.3.d. Regarding salt periphery under Cavern Design, this new section will allow caverns with less than 300 feet but more than 100 feet of salt separation to continue to operate with enhanced monitoring and any additional documentation that the commissioner feels necessary in the interest of safe operations.
- §327. A Mechanical Integrity Test (MIT) must now be performed prior to well closure except in the event of mechanical failure in the cavern. Additionally, a separate pressure test on the casing, of at least 60 minutes, shall be performed when an MIT is run.
- §329. Concerning cavern configuration and capacity, types and frequency of surveys are more detailed.
- §331. Inactive caverns may not be returned to service without the submittal of a written request and work permit application to the Office of Conservation, and the approval of the commissioner.
RCP Integrity Services: Salt Domes, too!
RCP has the tools and expertise to develop comprehensive Integrity Management Plans and implementation for liquid and gas pipelines, and salt dome storage facilities. If you would like information on RCP's Integrity Management Services, contact
PHMSA Oil Spill Response Planning and Preparedness Public Workshop April 12, 2016
[Docket No. PHMSA-2016-0021]
Back to Top
The Department of Transportation/Pipeline Hazardous Materials Safety Administration (PHMSA) will hold a public workshop to address oil spill response planning and preparedness. This workshop will include how to harmonize PHMSA’s regulations with the requirements of other agencies, and how operators of onshore
oil pipelines can prepare for an oil spill. The public workshop will held on Tuesday, April 12, 2016, from 9:00 a.m. to 4:30 p.m. EST. Changes to start and finish times will be updated on the PHMSA Meeting Website.
The workshop will be held at the National Transportation Safety Board Conference Center located in L'Enfant Plaza at 490 L'Enfant Plaza East SW, Washington, DC. If you are unable to attend in person, webcasting will be provided by The Capitol Connections. The links will be provided as the event nears. You can
test your system through http://www.capitolconnection.org/webcasting-support. It is recommended to do this prior to the date of the event.
Registration and additional information are available on the PHMSA website.
DOT Pipeline Compliance Workshop – Gas & Liquid
April 12-14, 2016
Back to Top
Join us April 12-14, 2016 in
Houston at our corporate office and dedicated training facility for an informative, lively, and interactive workshop on DOT Pipeline Compliance topics. The workshop provides an overview of
the DOT pipeline regulations in 49 CFR 191, 192, 194, 195, and 199. It also describes pipeline operations and engineering concepts. It is appropriate for people who are new to pipeline regulations, who could use a
refresher, or anyone who needs to know the latest developments in these areas. This workshop will be a combined format, addressing both gas and liquid pipeline topics in parallel.
This will eliminate some redundancy of materials, and will allow more time for in-depth discussions for each topic.
Topics to be addressed in the workshop include:
We will also discuss the Pipeline Safety, Regulatory Certainty, and Job Creation Act of 2011 (pipeline reauthorization bill), recent Advisory Bulletins from PHMSA, and new, pending and proposed
- An overview of DOT/OPS pipeline compliance requirements
- State and Federal agency roles for pipeline safety
- PHMSA Jurisdiction
- PHMSA Inspections and Enforcement Processes
- Engineering Concepts and Stress – Strain Relationships; %SMYS
- Design Requirements
- Construction Requirements
- Corrosion Control Concepts and Requirements
- Operations and Maintenance Requirements
- Emergency Response Requirements (including spill response planning requirements for liquid pipelines)
- Damage Prevention Programs
- Operator Qualification Programs
- Drug and Alcohol Programs
- Public Awareness Programs
- Integrity Management (gas and liquid) Programs
- Control Room Management Programs
Each attendee will receive the presentation as well as applicable handouts in a hardcopy notebook, and electronic copies of the applicable regulations and voluminous reference materials including rulemakings,
letters of interpretation, and other guidance documents. The workshop will adjourn at 2 p.m. on the third day, for those who need to fly out Thursday evening.
To register for our workshop, click here.
API Liquids Pipeline Safety Management System (PSMS) Workshop – Encore!
Back to Top
The API workshop on Pipeline Safety Management Systems on February 16th of this year was sold out with more than 100 people in attendance – so a second workshop similar to the first has been scheduled for April 26th. This workshop is designed to provide liquids pipeline companies with tools and knowledge to
implement API Recommended Practice 1173 Pipeline Safety Management System. To encourage an open sharing of ideas and implementation challenges, the workshop is open to employees of liquid pipeline operating companies only.
The Workshop will be held at the Hyatt Regency Houston Galleria, 2626 Sage Road, Houston, TX 77056. Hotel room
reservations deadline is April 11, 2016. The workshop registration, hotel information and a preliminary program can be found on the API Website.
API RP1173 Assessment Services
API recently published a new Recommended Practice (RP) concerning safety management systems for pipelines. API RP 1173 provides pipeline operators with a comprehensive way to make safe operations and continuous safety improvement a constant focus of their operations. The first step for most
pipeline operators will be to assess their current safety management system maturity – from nothing in place to a sustainable, improving system. RCP can assist operators in the evaluation of the maturity levels of each element of the recommended practice, and establish an action plan for
further development / maturity. Contact Jessica Foley for API RP 1173 Assistance.
Pressure Testing Webinar – Advantages of using TestOp®
Back to Top
RCP will be hosting webinar presentations to discuss pipeline pressure testing practices and demonstrate the advantages of utilizing new technology for planning, designing, and capturing real-time data to validate and document whether it was a successful test. The same technology that RCP has used for the past
six years to validate our customer's pressure tests has been greatly enhanced and is now being made available as a web-hosted solution for operators to use themselves.
TestOp® takes the confusion out of pressure testing by providing real-time determination of whether the test segment is experiencing potential issues, such as yielding or air entrapment volume absorption, all while modeling the mass balance relationship of pressures, volumes and temperatures of the test. TestOp®
will provide real-time indicators and corresponding data to confirm whether the test is successfully performing to plan or if there might be a small pin-hole leak that would otherwise go undetected before taking the line segment off test. TestOp® generates comprehensive and consistent reports, including a
certification letter, pressure test plan versus actual test results, pressure/spike test log, test instrument and pump calibrations, pipe volume calculations sheet, stress/strain and pressure/volume plots as well as upload capability for pictures and other document scans associated with the test.
We encourage any liquid or gas pipeline operator who has upcoming projects that involve replacement, integrity verification, new construction, uprates, conversions and/or reversals to sign-up for the 45 minute webinar. Some of the largest and most respected pipeline operators are now using TestOp® because they see
the value it brings to their overall pipeline integrity assurance program and we are confident you will too once you have seen it in person.
Mark your calendar and plan to attend one of these sessions or request an individual demonstration for your company at a date convenient
Click here to register.
- April 14, 2016 (Thursday) at 2 p.m. CDT
- May 24, 2016 (Tuesday) at 2 p.m. CDT
Maine Updates Underground Facility Damage Prevention Requirements
Back to Top
Last summer, Maine updated portions of its Underground Facility Damage Prevention Requirements (Maine State Regulations 65-407 Chapter 895) regarding Dig Safe System notifications and OKTODIG database. Effective March 14, 2016, additional updates to the regulation take effect. Excavations must now commence within
30 days of the notification to the Dig Safe System from the previous 60 days. Also, if the proposed excavation or blasting is not fully completed 60 calendar days after notification, the excavator shall re-notify the Dig Safe System. Additional information on the Maine Underground Damage Prevention Program can be
found by visiting the Maine Public Utilities Commission.
National Safe Digging Month
Back to Top
April is National Safe Digging Month (NSDM) and the Common Ground Alliance (CGA) wants to hear about the creative ways that you will be spreading the word about the importance of calling 811 before digging. They've created several easy-to-use tools and templates to get you started:
However you're spreading the 811 safety message this month, please be sure to email email@example.com with information and photos as well as filling out
this quick NSDM survey.
- Click here to download the NSDM web button. Ask your website administrator to post this button to your homepage and link it to www.call811.com.
- Visit the 811 Toolkit page on CGA's website to download a suite of NSDM media materials, social media messages and infographics, Governor's proclamation tools and case studies.
Pipeline Conference Schedule - Spring 2016
Back to Top
Have you registered and confirmed your reservations for the AGA Operations Conference? RCP will be attending. We hope to see you there!
AGA Operations Conference
April 19 – 22, 2016
Arizona Biltmore / Phoenix, AZ
The annual AGA Operations Conference is the natural gas industry's premier gathering of natural gas utility and transmission company operations management from across North America and the world for the sharing of technical knowledge, ideas and practices to promote the safe, reliable, and cost-effective delivery
of natural gas to the end-user. The Operations Conference is AGA's largest forum with regularly more than 500 operations management in attendance, including 80 speakers, and over 100 technical presentations.
Mark your calendar and plan to attend one of these sessions on Thursday, April 21st from RCP staff:
RCP is also hosting a special reception in The Biltmore "Gold Room" on April 20 (Wednesday) from 6 – 9 p.m. There will be cocktails, hors d'oeuvres, live entertainment and more. Keep checking your inbox for an invitation!
- Track D2 / 8:00 a.m.: "Development of Industry Guidelines for the Engineering Critical Assessment Process Under Integrity Verification"
- Track G3 / 3:35 p.m.: "Is an 8-hour pressure test long enough?"
PHMSA Public Workshop on LNG Regulations May 18-19, 2016
[Docket No. PHMSA- 2016-0005]
Back to Top
PHMSA will hold a public workshop to solicit input and information on future regulatory changes to the Part 193 regulations governing liquefied natural gas (LNG) facilities. According to PHMSA, existing regulations may not adequately incorporate risk-based assessments, process safety practices, and
technologies that have been developed since the 1970s when most LNG facilities were constructed.
The workshop will be held at the DOT headquarters, West Building Atrium, 1200 New Jersey Ave., SE in Washington, DC and will be webcast. To submit comments before or after the meeting via the E-Gov Website reference Docket No. PHMSA- 2016-0005 and follow the
Online registration and additional information are available on the PHMSA Meeting Website.
PHMSA Incident and Annual Data Analysis
RCP has designed a Pipeline Database Query tool, PDQ™, which researches gas transmission, gas distribution, or hazardous liquid pipelines based on PHMSA accident or infrastructure data. Have you ever wondered: How does your company stack up against your peers in accident rates? How do you weigh the risk based on
the materials and age of your pipeline against industry trends? PDQ™ can answer these questions and more. For more information, contact Jessica Foley.
Save the Dates!
RCP Workshop Schedule for 2016
DOT Gas & Liquid Pipeline Workshop: April 12-14 (Tuesday, Wednesday & Thursday)
Pressure Test Workshop: August 9-10 (Tuesday & Wednesday)
DOT Gas & Liquid Pipeline Workshop: October 4-6 (Tuesday, Wednesday & Thursday)
Visit our Training Webpage for updates, registration, and hotel information.
* * *
Special Note for 2016: The DOT Gas & Liquid Pipeline workshops will be taught in our combined format. There will not be a gas only or liquid only workshop in 2016.
We would welcome the opportunity to discuss our services with you.
W. R. (Bill) Byrd, PE
||IN THIS ISSUE
RCP is a registered professional engineering corporation staffed by more than 50 energy pipeline experts with extensive experience in energy pipeline risk management and regulatory compliance
issues. Since 1995, RCP has assisted companies and organizations of all types and sizes, including every pipeline operator in the Forbes 500 down to small municipal operators, with the challenges
of energy pipeline and terminal regulatory compliance and integrity management at the federal level, in every state, and in several foreign countries. Our personnel have experience as operators,
engineers, and managers, and participate at the highest levels of the gas and liquid energy pipeline industry by serving on technical research committees and developing industry standards.
RCP also offers pipeline integrity and corrosion control consulting services by providing operational support and program implementation management services, including selection, contracting, and
management of subcontractors in the field to implement the required program activities for corrosion control, in-line inspection, direct assessment, and more. RCP has the perfect team to support
your pipeline integrity and compliance requirements - from initial consulting, to program development, to implementation and final analysis of a broad range of pipeline regulatory compliance and
integrity management issues.
For more information, please contact Jessica Foley at 713-655-8080 or visit www.rcp.com.
RCP's Newsletters reach thousands of industry professionals around the nation and throughout the world.
You can subscribe to the DOT Pipeline Compliance newsletter by e-mailing your request to:
To unsubscribe from our newsletter, please click here.
We rely on reader input to keep the newsletter contents interesting, so if there's a topic you would like discussed, send it to us via email.
If you have a relevant regulatory meeting planned, please let us know, and we'll announce it in our upcoming DOT Pipeline Newsletters.
More About RCP
For additional information on RCP, please visit: rcp.com or Contact Jessica Foley at 1-888-727-9937 for more info.